• 會員登入
2 Year Warranty

PCI-1245E-AE Economic 4-Axis DSP-Based SoftMotion Controller

  • Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  • Pulse output up to 5 Mpps
  • Memory buffer for trajectory planning (circular trajectory and auto blending are not supported)
  • Supports E-Gear
  • Hardware emergency input
  • Watchdog timer
  • Position latch via ORG & index signal
  • Programmable interrupt
Certifications CE RoHS
(未含稅)
還剩: 2 件
加入購物車 直接結帳

週邊配件

PCI-1245E-AE

主產品:PCI-1245E-AE

Economic 4-Axis DSP-Based SoftMotion Controller

週邊配件

  • CIRCUIT BOARD, PCI-1240 Wiring Terminal, DIN-rail Mount

    NT$2,190
  • CIRCUIT MODULE, 2-Axis 50-pin SCSI DIN-rail motion wiring board

    NT$2,390
  • CABLE, SCSI-100 Shielded Cable, 3m

    NT$3,390
  • CABLE, SCSI-100 to 2*SCSI-50 Shielded Cable, 1m

    NT$1,890
  • CABLE, SCSI-100 to 2*SCSI-50 Shielded Cable, 2m

    NT$2,290
  • CABLE, 100Pin to two 50Pin SCSICable for PCI-1240,3M

    NT$2,790
  • DB26 to SCSI-50 Cable for Panasonic A5, 2m

    NT$729

{{relatedTitle}}

主產品 + {{numOfSelectedRelatedProducts}}週邊配件

小計 {{subTotalStr}}

詳細規格

General

  • Power Consumption Typical: 5 V @ 850 mA; Max.: 5 V @ 1 A
  • Temperature (Operating) 0 ~ 60°C (32 ~ 140°F)
  • Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3)
  • Temperature (Storage) -20 ~ 85°C (-4 ~ 185°F)
  • Bus Universal PCI V2.2
  • Dimensions 175 x 100 mm (6.9" x 3.9")
  • Connector 1 x 100-pin SCSI Female Connector

Encoder Interface

  • Isolation Protection 2,500 VDC
  • Input Type Quadrature (A/B phase) or up/down
  • Input Range 5 ~ 15 V
  • Max. Input Frequency 10 MHz under 4xAB mode

Pulse Type Motion Control

  • Motor Driver Support Pulse-type servo/stepping
  • Number of Axis 4
  • Interpolation 2-axis linear
  • Max. Output Speed 5 Mbps
  • Step Count Range ±2, 147, 483, 646
  • Pulse Output Type Pulse/direction (1-pulse, 1-direction type) or CW/CCW (2-pulse type)
  • Position Counters Range of command and actual position
  • Velocity Profiles T-Curve, S-Curve
  • Machine Interfaces LMT+, LMT-, ORG
  • Servo Driver Interfaces ALM, INP
  • General Digital I/O 16-ch DI, 16-ch DO
x
聯絡我們

0800-777-111

9:00-17:30

Contact Advantech