• 會員登入
2 Year Warranty

PCI-1285E-AE 8-Axis DSP-Based SoftMotion Controller PCI Card

  • Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  • Pulse output up to 5 Mpps
  • Memory buffer for trajectory planning (circular trajectory and auto blending are not supported)
  • Supports E-Gear (only for PCI-1245E)
  • Hardware emergency input
  • Watchdog timer
  • Position latch via ORG & index signal
  • Programmable interrupt
  • RDY/LTC-dedicated input channels & SVON/CMP/CAM-DO/ERC-dedicated output channels are switchable for general input and output purposes
  • 預約(案場規劃)或(軟硬整合)諮詢服務
Certifications CE RoHS

已含稅
加入購物車 直接結帳

詳細規格

General

  • Humidity (Storage) 5~95% RH (non-condensing)
  • Humidity (Operating) 5~95% RH (non-condensing)
  • Connectors 2 x 100-pin mini-SCSI female connector

Counter/Encoder Input

  • Counting Range 32-bit

Encoder Type and Interface

  • Input Type Quadrature (A/B phase) or up/down
  • Input Range 0~1 VDC for low; 3.5~5 VDC for high
  • Max. Input Frequency 10 MHz under x4 A/B phase mode
  • Counts per Enc. Cycle x1, x2, x4 (A/B phase only)

Pulse Type Motion Control

  • Motor Driver Support Pulse-type servo/stepping
  • Interpolation 2 to 8-axis linear
  • Max. Output Speed 5 Mbps
  • Step Count Range ±2, 147, 483, 646
  • Pulse Output Type Pulse/direction (1-pulse, 1-direction type) or CW/CCW (2-pulse type)
  • Velocity Profiles T-Curve, S-Curve

Frequency

  • Signal Input Logic level 1: 10~30 VDC Logic level 0: 0~3 VDC

Local I/O

  • General Input Signal Input voltage: 24 VDC Max. Input delay: 100 us Max. (isolation delay) Signal: EMG (emergency stop) ORG, LMT+, LMT- INPOS (in position signal) LTC (counter latch) RDY (servo ready) ALARM (servo alarm)
  • General Output Signal Output voltage: Open collect 24 VDC Max Output delay: 100 us Max. (isolation delay) Sink current: 100 mA per channel Signal: CMP (position compare in range output) SVON (servo on) RALM (reset driver alarm) ERC (counter clear signal)
x
聯絡我們

0800-777-111

9:00-17:30

Contact Advantech